void chushi(void) //進主MAIN函數體時直接初始化
{
TMOD=0x01; //定時器定時模式
TH0=0x3c;
TL0=0xb0;
ET0=1;
EA=1;
TR0=1;
xuanled=1;
guanled=1;
rfled=1;
}

void chushi1(void) //對大循環的初始化
{
time=30; //開機時時間初值為30分鐘

guanout=0; //光譜輸出為低電平
rfout=0; //RF發熱頭輸驅動為低電平
xuanout=0; //旋磁輸出低電平
guannum=0; //待機時,光譜為0狀態

xuanled=1;
guanled=1;
rfled=1;

duan=tab[10]; //開段顯示,顯示中間筆段
gewela=0;
shiwela=0;
delay(2);
gewela=1;
shiwela=1;
}

void key(void) //按鍵檢測模塊
{
uchar a,num1;
keyio=0xff;
if(keyio!=0xff)
{
fmqout=0;
if(onandoff!=0)
{
for(a=100;a>0;a--)
display(time);
}
else
{ for(a=20;a>0;a--)
{
duan=tab[10]; //開段顯示,顯示中間筆段
gewela=0;
shiwela=0;
delay(2);
gewela=1;
shiwela=1;
}
}
if(keyio!=0xff)
{
num1=keyio;
switch(num1)
{
case 0xfe: onandoff=~onandoff; //開關機
break;

case 0xfd: b=0;
if((onandoff!=0)(time!=99)) //時間加
time++;
break;

case 0xfb: b=0;
if((onandoff!=0)(time!=0)) //時間減
time--;
break;

case 0xf7: if(onandoff!=0)
{
xuanout=~xuanout; //旋磁轉動變量變化
if(xuanout!=0)
xuanled=0;
else xuanled=1;
}
break;

case 0xef: if(onandoff!=0) //光譜輸出變量變化
{
guannum++;
if(guannum==4)
guannum=0;

if(guannum!=0)
guanled=0;
else guanled=1;

if(guannum==1)
guanout=1;
else if(guannum==2)
guantime1=guantime2=15;
else if(guannum==3)
guantime1=guantime2=8;
else guanout=0;

}
break;
case 0xdf: if(onandoff!=0) //RF發熱變量變化
{
rfout=~rfout;
if(rfout!=0)
rfled=0;
else rfled=1;
}
break;
default:break;

}
}

}
}

void display(uchar min)//數碼管顯示模塊
{
uchar ge,shi;
shi=min/10;
ge=min%10;

duan=tab[shi];
shiwela=0;
delay(5);
shiwela=1;

duan=tab[ge];
xsdbit=xsd;
gewela=0;
delay(5);
gewela=1;
}